Electrical connection

Main Menu

  • News
  • Products
    • Cabling
    • Data & Communications
    • Industrial
    • Lighting
    • Solar & Renewables
    • Test & Measurement
  • Wiring Rules
  • Features
  • Sponsored

logo

Electrical connection

  • News
  • Products
    • Cabling
    • Data & Communications
    • Industrial
    • Lighting
    • Solar & Renewables
    • Test & Measurement
  • Wiring Rules
  • Features
  • Sponsored
LightingProducts
Home›Technology›Lighting›LED weatherproof battens from ANL Lighting

LED weatherproof battens from ANL Lighting

By Paul Skelton
10/09/2013
1812
0

After successfully launching LED versions of many other light fittings, including downlights, flood lights and high bays, Vibe Lighting has introduced a new range of LED weatherproof battens.

Using Vibe’s existing, tried and tested weatherproof battens, strips of high quality Tridonic LED Modules, which produce similar light outputs to Fluorescent tubes are installed to replace the tubes. With a high LOR frosted diffuser to soften the light and engineered quality heat management, these fittings ensure the highest performance and longest life.

Car parks, public areas, freezers, schools, warehouses and abattoirs are just some of the many applications for Vibe Weatherproof Battens. To cater for all needs, these weatherproof battens are available in emergency and dimmable versions, as well as standard. The emergency version features a test switch and light, with an option of 1 or 3 hour durations. It provides approximately 10% of the light output when in emergency mode, and depending on the wattage, will light up full or half of the fitting. The dimmable version gives perfect linear dimming from 0 ~ 100% and is available as DALI, DSI, switchDIM and corridorFUNCTION.

ADVERTISEMENT

DALI:
• Digitally controlled modules via DALI signal
• Functions depend on controller used
• Minimum and maximum dimming levels can be programmed
• Control input is protected against polarity reversal and accidental connection to mains voltage
• Control line must be installed according to relevant directives on low voltage

DSI (Digital Serial Interface):
• Controlled by a separate line
• If layout is changed, only the control line needs re-routing; load line can stay
• Low voltage cable is polarity free and can be connected to the DSI connection of the converter.
• Tconverters with integrated DSI function can specify a minimum dimming value, maximum brightness and emergency value for all connected devices in control circuit.
• Digital interface ensures consistent lighting levels from first to last fitting
• Individual fittings can not be addressed separately

switchDIM:
• Enables a standard switch for dimming and switching to be connected directly
• Pressing for <0.6s will switch the converter on or off
• Pressing for >0.6s will dim the module
• Dimming direction is changed when switch is operated again
• Hold switch for 10s to synchronise all connected devices to 50% dimming value

corridorFUNCTION:
• Presence controlled lighting systems can be programmed without additional controller
• Light is not switched off when no one is present, but dims to pre-set level
• Possibly can switch off after a pre-set period of time

Vibe’s LED Weatherproof Battens are available in T5 & T8 Polycarbonate or T8 ABS, are heavy impact resistant, IP65 and come complete with electronic ballast and stainless steel clips. The ABS Battens are stronger and resistant to some harsh chemicals. The T5 option is only available in the standard version, while the T8 options are available in emergency and dimmable as well.

All of these battens are available in 22W, which replaces a 1 x 28W Fluorescent, 26W, which replaces a 1 x 36W, 40W, replacing a 2 x 28W and 48W, replacing a 2 x 36W Fluorescent. These are all available in colour temperatures of 3000K (Warm White) and 4000K (Cool White), and have a long lifespan of 50,000 hours.

www.anllighting.com.au.

TagsLatest productsLighting
Previous Article

MGE Galaxy 5500 by Schneider Electric

Next Article

How to recycle your old lamps

  • ADVERTISEMENT

  • ADVERTISEMENT

Issue 1, 2025
Subscribe Now

Advertisement

Sign up to our newsletter

Advertisement

  • Home
  • About Electrical Connection
  • Download Media Kit
  • Contribute
  • Contact Us